View 74LS85_195175.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

SN74LS85 4-Bit Magnitude Comparator
The SN74LS85 is a 4-Bit Magnitude Camparator which compares two 4-bit words (A, B), each word having four Parallel Inputs (A0 - A3, B0 - B3); A3, B3 being the most significant inputs. Operation is not restricted to binary codes, the device will work with any monotonic code. Three Outputs are provided: "A greater than B" (OA > B), "A less than B" (OA < B), "A equal to B" (OA = B). Three Expander Inputs, IA > B, IA < B, IA = B, allow cascading without external gates. For proper compare operation, the Expander Inputs to the least significant position must be connected as follows: IA < B= IA > B = L, IA = B = H. For serial (ripple) expansion, the OA > B, OA B, IA < B, and IA = B Inputs of the next most significant comparator, as shown in Figure 1. Refer to Applications section of data sheet for high speed method of comparing large words. The Truth Table on the following page describes the operation of the SN74LS85 under all possible logic conditions. The upper 11 lines describe the normal operation under all conditions that will occur in a single device or in a series expansion scheme. The lower five lines describe the operation under abnormal conditions on the cascading inputs. These conditions occur when the parallel expansion technique is used. * Easily Expandable * Binary or BCD Comparison * OA > B, OA < B, and OA = B Outputs Available
GUARANTEED OPERATING RANGES
Symbol VCC TA IOH IOL Parameter Supply Voltage Operating Ambient Temperature Range Output Current - High Output Current - Low Min 4.75 0 Typ 5.0 25 Max 5.25 70 - 0.4 8.0 Unit V C mA mA
http://onsemi.com
LOW POWER SCHOTTKY
16 1
PLASTIC N SUFFIX CASE 648
16 1
SOIC D SUFFIX CASE 751B
ORDERING INFORMATION
Device SN74LS85N SN74LS85D Package 16 Pin DIP 16 Pin Shipping 2000 Units/Box 2500/Tape & Reel
(c) Semiconductor Components Industries, LLC, 1999
1
December, 1999 - Rev. 6
Publication Order Number: SN74LS85/D
SN74LS85
CONNECTION DIAGRAM DIP (TOP VIEW)
VCC 16 A3 15 B2 14 A2 13 A1 12 B1 11 A0 10 B0 9 NOTE: The Flatpak version has the same pinouts (Connection Diagram) as the Dual In-Line Package. 1 B3 2 IAB 5 6 8 7 OA B OA > B OA B, Expander Inputs A Greater than B Output B Greater than A Output A Equal to B Output HIGH 1.5 U.L. 1.5 U.L. 0.5 U.L. 10 U.L. 10 U.L. 10 U.L. LOW 0.75 U.L. 0.75 U.L. 0.25 U.L. 5 U.L. 5 U.L. 5 U.L.
OA>B OA=B
NOTES: a) 1 TTL Unit Load (U.L.) = 40 mA HIGH/1.6 mA LOW.
LOGIC SYMBOL
10 12 13 15 9 11 14 1 4 2 3 A0 A1 A2 A3 B0 B1 B2 B3 IA>B OA>B IAhttp://onsemi.com
2
SN74LS85
LOGIC DIAGRAM
(15) (1)
A3 B3
(5) (13)
OA>B
(14) (2) AB (12) (11)
A2 B2
(6)
OA=B
A1 B1
(7)
OAA0 B0
(10) (9)
TRUTH TABLE
COMPARING INPUTS A3,B3 A3>B3 A3B2 A2B1 A1B0 A0B X X X X X X X X H L X H L IAB H L H L H L H L H L L L H OUTPUTS OAH = HIGH Level L = LOW Level X = IMMATERIAL
http://onsemi.com
3
SN74LS85
A n3 A n2 A n1 B n3 B n2 B n1 An A0 A1 A2 A3 B0 B1 B2 A0 A1 A2 A3 B0 B1 B2 B3 B3 OA > B OA B OA B IA B IA B AL = LOW LEVEL H = HIGH LEVEL
Figure 1. Comparing Two n-Bit Words
APPLICATIONS Figure 2 shows a high speed method of comparing two 24-bit words with only two levels of device delay. With the technique shown in Figure 1, six levels of device delay result
Table 1
WORD LENGTH 1 - 4 Bits 5 - 24 Bits 25 - 120 Bits NUMBER OF PKGS. 1 2-6 8 - 31
when comparing two 24-bit words. The parallel technique can be expanded to any number of bits, see Table 1.
NOTE: The SN74LS85 can be used as a 5-bit comparator only when the outputs are used to drive the A0-A3 and B0-B3 inputs of another SN74LS85 as shown in Figure 2 in positions #1, 2, 3, and 4.
INPUTS (LSB) A0 A1 A2 A3 B0 B1 B2 B3 A0 A1 A2 A3 B0 B1 B2 B3 IA > B OA > B IA B OA > B IA B #4 IA B IA = B OA = B NC
A10 A11 A12 A13 B10 B11 B12 B13 A0 A1 A2 A3 B0 B1 B2 B3 OA > B #3 OA B IA = B OA = B NC
A15 A16 A17 A18 B15 B16 B17 B18 A0 A1 A2 A3 B0 B1 B2 B3 OA > B #2 OA B IA = B OA = B NC
A4 B4 L
A9 B9 L
A14 B14 L
A0 A1 A2 A3 B0 B1 B2 B3 IA > B OA > B IA < B IA = B #6 OA < B OA = B OUTPUTS
MSB = MOST SIGNIFICANT BIT LSB = LEAST SIGNIFICANT BIT L = LOW LEVEL H = HIGH LEVEL NC = NO CONNECTION
Figure 2. Comparison of Two 24-Bit Words http://onsemi.com
4
SN74LS85
DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified)
Limits Symbol VIH VIL VIK VOH Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Voltage 2.7 - 0.65 3.5 0.25 VO OL Output LOW Voltage 0.35 Input HIGH Current A < B, A > B Other Inputs A < B, A > B Other Inputs IIL IOS ICC Input LOW Current A < B, A > B Other Inputs Output Short Circuit Current (Note 1) Power Supply Current - 20 0.5 V A IOL = 8.0 mA 0.4 Min 2.0 0.8 - 1.5 Typ Max Unit V V V V V Test Conditions Guaranteed Input HIGH Voltage for All Inputs Guaranteed Input LOW Voltage for All Inputs VCC = MIN, IIN = - 18 mA VCC = MIN, IOH = MAX, VIN = VIH or VIL per Truth Table IOL = 4.0 mA VCC = VCC MIN, VIN = VIL or VIH per Truth Table
IIH
20 60 0.1 0.3 - 0.4 - 1.2 -100 20
VCC = MAX, VIN = 2.7 V
mA
VCC = MAX, VIN = 7.0 V
mA mA mA
VCC = MAX, VIN = 0.4 V VCC = MAX VCC = MAX
Note 1: Not more than one output should be shorted at a time, nor for more than 1 second.
AC CHARACTERISTICS (TA = 25C, VCC = 5.0 V)
Limits Symbol tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL tPLH tPHL Parameter Any A or B to A < B, A > B Any A or B to A = B A B A = B to A = B A > B or A = B to A < B Min Typ 24 20 27 23 14 11 13 13 14 11 Max 36 30 45 45 22 17 20 26 22 17 Unit ns ns ns ns ns VCC = 5.0 V CL = 15 pF Test Conditions
AC WAVEFORMS
VIN
1.3 V tPHL
1.3 V tPLH 1.3 V
VIN
1.3 V tPHL
1.3 V tPLH 1.3 V
VOUT
1.3 V
VOUT
1.3 V
Figure 3.
Figure 4.
http://onsemi.com
5
SN74LS85
PACKAGE DIMENSIONS
N SUFFIX PLASTIC PACKAGE CASE 648-08 ISSUE R
-A-
16 9 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. DIM A B C D F G H J K L M S INCHES MIN MAX 0.740 0.770 0.250 0.270 0.145 0.175 0.015 0.021 0.040 0.70 0.100 BSC 0.050 BSC 0.008 0.015 0.110 0.130 0.295 0.305 0_ 10 _ 0.020 0.040 MILLIMETERS MIN MAX 18.80 19.55 6.35 6.85 3.69 4.44 0.39 0.53 1.02 1.77 2.54 BSC 1.27 BSC 0.21 0.38 2.80 3.30 7.50 7.74 0_ 10 _ 0.51 1.01
B
1 8
F S
C
L
-T- H G D
16 PL
SEATING PLANE
K
J TA
M
M
0.25 (0.010)
M
http://onsemi.com
6
SN74LS85
PACKAGE DIMENSIONS
D SUFFIX PLASTIC SOIC PACKAGE CASE 751B-05 ISSUE J
-A-
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. MILLIMETERS MIN MAX 9.80 10.00 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.386 0.393 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.229 0.244 0.010 0.019
16
9
-B-
1 8
P
8 PL
0.25 (0.010)
M
B
S
G F
K C -T-
SEATING PLANE
R
X 45 _
M D
16 PL M
J
0.25 (0.010)
TB
S
A
S
DIM A B C D F G J K M P R
http://onsemi.com
7
SN74LS85
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5487-8345 Email: r14153@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
8
SN74LS85/D

▲Up To Search▲

Price & Availability of 74LS85

	To Download 74LS85 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .